| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column shroud panel.
(Refer to Body - "Crash Pad Lower Panel")
|
| 3. |
Disconnect the connector (B) of the coil antenna and then remove the
coil antenna (A) after loosening the screw.
|
| Installation |
| 1. |
Install the coil antenna and connect the connector.
|
| 2. |
Install the steering column shroud panel.
|
Immobilizer Control Unit: Repair proceduresHyundai Creta GS 2014-2026 Service Manual: Tail Gate Trim
Components and components location
Component Location
1. Tail gate trim
Repair procedures
Replacement
•
Put on gloves to protect your ...
Hyundai Creta GS 2014-2026 Service Manual: Evaporator Temperature Sensor
Description and operation
Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by excessive cooling. The evaporator temperature sensor has the Negative Temper ...