WARNING: Modifying or adding equipment to the front end of your vehicle (including hood, bumper system, frame, front end body structure, tow hooks and hood pins) may affect the performance of the airbag system, increasing the risk of injury. Do not modify or add equipment to the front end of your vehicle.
Your vehicle has a collection of crash and occupant sensors. These sensors provide information to the restraints control module which activates the following:
Based on the type of crash, the restraints control module deploys the appropriate safety devices.
The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. The readiness of the safety system is indicated by a warning indicator light in the instrument cluster or by a backup tone if the warning light is not working. Routine maintenance of the airbag is not required.
A difficulty with the system is indicated by one or more of the following:
The readiness light will not
illuminate immediately after you
switch the ignition on.
If any of these things happen, even intermittently, have the supplemental restraint system serviced immediately. Unless serviced, the system may not function properly in the event of a crash.
The fact that the seatbelt pretensioners or front airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather, it means the restraints control module determined the accident conditions (crash severity, seatbelt usage) were not appropriate to activate these safety devices.
Disposing of Airbags
Contact your authorized dealer as soon as possible. Airbags must be disposed of by qualified personnel.
Front Passenger Sensing System
911 AssistHyundai Creta GS 2014-2026 Service Manual: Rear Seat Back Cover
Components and components location
Component Location
1. Rear seat back cover [LH]
2. Rear seat back cover [RH]
Repair procedures
Replacement
[6:4 Back folding type]
(LH)
...
Hyundai Creta GS 2014-2026 Service Manual: Refrigerant Line
Components and components location
Components Location
1. Refrigerant Line Assembly
Repair procedures
Replacement
1.
If the compressor is marginally operable, run the engine at idle speed,
and let the air conditi ...