Lincoln Nautilus: Remote Start / Remotely Starting and Stopping the Vehicle

Lincoln Nautilus 2018-2026 Owners Manual / Remote Start / Remotely Starting and Stopping the Vehicle

Remotely Starting the Vehicle

Lincoln Nautilus. Remotely Starting and Stopping the Vehicle Press the button on the remote control.

Lincoln Nautilus. Remotely Starting and Stopping the Vehicle Within three seconds, press the button on the remote control.

Within three seconds, press the button again.

Note: You can also use the Lincoln Way App to start the vehicle.

Note: The direction indicators flash twice.

Note: The parking lamps turn on when the vehicle is running.

Note: The horn sounds if the system fails to start.

Note: All other vehicle systems remain off when you have remotely started the vehicle.

Note: The vehicle remains secured when you have remotely started the vehicle. A valid key must be inside your vehicle to switch the ignition on and drive your vehicle.

Remotely Stopping the Vehicle

Lincoln Nautilus. Remotely Starting and Stopping the Vehicle Within three seconds, press the button on the remote control.

Within three seconds, press the button again.

What Is Remote Start. Remote Start Precautions. Remote Start Limitations. Enabling Remote Start
What Is Remote Start The system allows you to remotely start your vehicle and to adjust the interior temperature according to the settings that you chose. Remote Start Precautions WARNING: Do not st ...

Extending the Remote Start Duration
To extend the remote start duration during remote start, do the following: Press the button on the remote control. Within three seconds, press the button on the remote control. Within three secon ...

Other information:

Hyundai Creta GS 2014-2026 Service Manual: Line Pressure Control Solenoid Valve
Description and operation Description • Line pressure control solenoid valve is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the line pressure. ...

Hyundai Creta GS 2014-2026 Service Manual: Accelerator Pedal: Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal. 2. Disconnect the accelerator position sensor connector (A). 3. Remove the mounting nuts (B). ...

© 2017-2026 www.hcrmangs.com