Hyundai Creta: Fuel Filler Door / Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
1.
Open the fuel filler door cap (A).

2.
After loosening the mounting bolts, then remove the fuel filler door (A).
  
Pull out from inside of the packing part when removing the fuel filler door housing.

3.
To install, reverse the removal procedure.
  
Make sure the fuel filler door locks / unlocks and opens / closes properly.
Replace any damaged clips.
Components and components location
Component Location 1. Fuel filler door ...

Front Door
...

Other information:

Hyundai Creta GS 2014-2024 Service Manual: 26 Brake Control Solenoid Valve (26/B_VFS)
Description and operation Description • 26 brake control solenoid valve (26/B_VFS) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the 26Brake. ...

Hyundai Creta GS 2014-2024 Service Manual: Troubleshooting
Troubleshooting Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as required ...

© 2017-2024 www.hcrmangs.com