Lincoln Nautilus: Climate Control / Setting the Temperature. Directing the Flow of Air
Setting the Temperature
Press the toggle button on the
left-hand side
of the climate control upward or downward
to set the left-hand temperature.
Note: This control also adjusts the right-hand side temperature when you switch off dual zone mode.
Press the toggle button on the right-hand side of the climate control upward or downward to set the right-hand temperature.
Directing the Flow of Air
Directing Air to the Windshield Air Vents
Press the button to activate the
selection screen.
Press the button on the
touchscreen.
Directing Air to the Instrument Panel Air Vents
Press the button to activate the
selection screen.
Press the button on the
touchscreen.
Directing Air to the Footwell Air Vents
Press the button to activate the
selection screen.
Press the button on the
touchscreen.
Switching the Heated Rear Window On and Off. Switching the Heated Mirrors On and Off. Setting the Blower Motor Speed
Switching the Heated Rear Window On and Off
Press the button to clear the
rear
window of thin ice and fog. The
heated rear window turns off after
a short period of time.
Note: Do not use harsh ch ...
Auto Mode
Switching Auto Mode On and Off
Press the button to switch auto
mode on. Repeatedly press the
button to adjust auto mode.
The system adjusts the blower motor speed,
air distribution, air conditioni ...
Other information:
Hyundai Creta GS 2014-2025 Owners Manual: Engine Start/Stop button
Whenever the front door is opened,
the Engine Start/Stop button will illuminate
and will go off 30 seconds
after the door is closed. (if equipped)
WARNING
To reduce risk of serious injury or
death, NEVER allow children or
any person who is unfamiliar with
the vehicle to touch the Eng ...
Hyundai Creta GS 2014-2025 Service Manual: Front Door Belt Outside Weatherstrip: Repair procedures
Replacement
1.
Pull down front door window glass by pressing the power window glass
switch.
2.
Remove the front door belt outside weatherstrip (A).
3.
To install, reverse the removal procedure.
...
