Hyundai Creta: Fuel Delivery System / Accelerator Pedal: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Accelerator Pedal: Repair procedures

Removal

1.	Turn the ignition switch OFF and disconnect the negative (-) battery terminal.

2.	Disconnect the accelerator position sensor connector (A).

3.	Remove the mounting nuts (B).

Installation

Install in the reverse order of removal.

Accelerator pedal module mounting nut :

12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)

Accelerator pedal module mounting bolt :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Filler-Neck Assembly: Repair procedures

Removal 1. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A). 2. Lift the vehicle. ...

Delivery Pipe: Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Release the residual pressure in fuel lin ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Auto Defogging Sensor
Description and operation Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moi ...

Hyundai Creta GS 2014-2019 Service Manual: Parking Brake Cable: Repair procedures
Removal The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. 1. Release the parking brake lever and parking brake cab ...