Hyundai Creta: Automatic Transaxle System
Hyundai Creta GS 2014-2019 Service Manual / Automatic Transaxle System
- General Information
- Clutch & Brake
- Hydraulic System
- Valve Body System
- Automatic Transaxle System
- Automatic Transaxle Cooling System
- Automatic Transaxle Control System
- Description and operation
- Components and components location
- Schematic diagrams
- Repair procedures
- Transaxle Control Module (TCM)
- Transaxle Oil Temperature Sensor
- Input Speed Sensor
- Output Speed Sensor
- Torque Converter Control Solenoid Valve (T/CON_VFS)
- 26 Brake Control Solenoid Valve (26/B_VFS)
- Line Pressure Control Solenoid Valve
- 35R Clutch Control Solenoid Valve (35R/C_VFS)
- Underdrive Brake Control Solenoid Valve (UD/B_VFS)
- Overdrive Clutch Control Solenoid Valve (OD/C_VFS)
- SS-A Solenoid Valve (ON/OFF)
- SS-B Solenoid Valve (ON/OFF)
- Inhibitor Switch
- Shift Lever
- Shift Cable
Control Shaft Assembly
Description and operation
Description
Control shaft assembly is mounted on the top of the manual transmission, and
select & shift cable are equipped.
Control shaft assembl ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Immobilizer Control Unit: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector of the immobilizer unit and ...
Hyundai Creta GS 2014-2019 Service Manual: Seat Belt Buckle Switch (BS)
Description and operation
Description
Buckle Sensor (BS) sends driver/passenger seat belt fastened/unfastened status
signal to the Smart Junction Box (SJB). If either side seat belt is unfastened,
the warning lamp is turned ON in the Cluster, and turned OFF when the seat belt ...
В© 2017-2026 www.hcrmangs.com
