Hyundai Creta: Charging System / Battery Sensor

Description and operation

Description
Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor (A) is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to ECM. ECM controls generating voltage by duty cycle based on these signals.

Repair procedures

Removal
1.
Disconnect the battery negative (-) cable.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery negative (-) cable after removing the bolt (B).

Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation bolt :
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~23.9 lb-ft)
Battery (-) terminal l tightening nut :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Battery
Description and operation Description 1. The MF(Maintenance Free) battery is, as the name implies, totally maintenance free and has no removable battery cell caps ...

Starting System
...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Variable Intake Solenoid (VIS) Valve
Description and operation Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition ...

Hyundai Creta GS 2014-2019 Service Manual: Special service tools
Special Service Tools Tool (Number and Name) Illustration Use 09200-3N000 Engine support fixture (Beam) Removal and installation of the transmission. Use this beam (SST No. : 09200-3N000) with the ...

В© 2017-2026 www.hcrmangs.com