Hyundai Creta: Blower / Climate Control Air Filter

Description and operation

Description
The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust filter to ensure comfortable interior environment.

Repair procedures

Replacement
1.
Remove the glove box (A).

2.
Remove the filter cover (A) by pressing the knob.

3.
Replace the air filter (A) with a new one according to the direction of air filter.

  
To remove the filter easily, press the right side inward then pull out the filter.
In case of driving in an air-polluted area or rugged terrain, check and replace the air filter as frequently as possible.
4.
Install in the reverse order of removal.
Power Mosfet (DATC)
Description and operation Description It is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor. Repair procedures ...

Intake Actuator
Components and components location Components Location 1. Intake actuator Description and operation Description The intake actuator i ...

Other information:

Hyundai Creta GS 2014-2023 Service Manual: Parking Assist Sensor
Components and components location Component Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") ...

Hyundai Creta GS 2014-2023 Service Manual: Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    • If a DTC ...

© 2017-2023 www.hcrmangs.com