Hyundai Creta: Electric Power Steering / Description and operation

Description
EPS (Electric power steering, Column assist type) system uses an electric motor to assist the steering force and it is an engine operation independent steering system.
EPS control module controls the motor operation according to information received from the each sensor and CAN (Controller Area Network), resulting in a more precise and timely control of steering assist than conventional engine-driven hydraulic systems.
Components (Torque Sensor, Fail-safe relay, etc.) of the EPS system are located inside the steering column & EPS unit assembly and the steering column & EPS unit assembly must not be disassemble to inspect or replace them.


Operation
Note With Regard to diagnosis
Trouble factor
Check item
Trouble symtom
Explanation
Note
Drop, impact, and overload
Motor
Abnormal noise
Visable or unvisable damage can occur.The steering wheel could pull to one side by using the dropped parts.
Precise parts of motor/ECU are sensitive to vibration and impact.
Overload can cause unexpected damage
Do not use the impacted EPS.
Do not overload each parts.
ECU
Circuit damage
Wrong welding point
Broken PCB
Damaged precise parts
Torque sensor
Insufficient steering effort
Overload to INPUT shaft can cause malfunction of the torque sensor
Do not impact the connecting parts (When inserting and torquing)
Use the specified tool to remove the steering wheel. (Do not hammer on it)
Do not use the impacted EPS
Shaft
Insufficient steering effort (Uneven between LH and RH)
 
Do not use the impacted EPS
Pull/Dent
Harness
Malfunction-impossible power operation
Malfunction of EPS
Disconnection between harness connecting portion and harness
Do not overload the harness
Abnormal storage temperature
Motor/ECU
Abnormal steering effort by improper operation of the motor/ECU
Waterproof at the normal condition
Even a little moisture can cause malfunction of the precise parts of the motor/ECU
Keep the normal temperature and proper moisture, while storaging
Avoid drowning

Electric Power Steering
...

Schematic diagrams
Schematic Diagrams Terminal function Type Pin No Description MDPS Power 1 Battery + ...

Other information:

Hyundai Creta GS 2014-2024 Service Manual: Repair procedures
Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by turning the hood overslam bumpers (C). 3. After loosen ...

Hyundai Creta GS 2014-2024 Service Manual: Shift Lever
Components and components location Components Location 1. Shift lever knob & boots 2. Shift lever assembly 3. Shift cable 4. Manual control lever 5. Shift cable retainer Components 1. Shift lever & boots a ...

© 2017-2024 www.hcrmangs.com