1. Turn the ignition switch and all other switches off.
2. Remove the fuse box cover by pressing the tab and pulling up the cover.
3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
4. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, we recommend that you consult an authorized HYUNDAI dealer.
NOTICE
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. If not, electrical failures may occur from water leaking in.
If the multi fuse is blown, it must be removed as follows:
1. Disconnect the negative battery cable.
2. Remove the nuts shown in the picture above.
3. Replace the fuse with a new one of the same rating.
4. Reinstall in the reverse order of removal.
CAUTION
If the main fuse is not assembled properly, it may cause fire.
If the main fuse is blown, we recommend that you consult an authorized HYUNDAI dealer.
Hyundai Creta GS 2014-2023 Service Manual: CVVT Oil Control Valve (OCV)
Description and operation
Description
The Continuously Variable Valve Timing (CVVT) system controls the amount of
valve overlap by varying the amount of oil flow into an assembly mounted on
the intake camshaft through ECM control of an oil control valve.
As oil is directed ...
Hyundai Creta GS 2014-2023 Service Manual: Front Door Window Glass
Components and components location
Component Location
1. Front door window glass
Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
...