Hyundai Creta: Engine Control / Fuel System / Engine Control System
Hyundai Creta GS 2014-2019 Service Manual / Engine Control / Fuel System / Engine Control System
- Description and operation
- Components and components location
- Engine Control Module (ECM)
- ETC (Electronic Throttle control) System
- Manifold Absolute Pressure Sensor (MAPS)
- Intake Air Temperature Sensor (IATS)
- Engine Coolant Temperature Sensor (ECTS)
- Crankshaft Position Sensor (CKPS)
- Camshaft Position Sensor (CMPS)
- Knock Sensor (KS)
- Heated Oxygen Sensor (HO2S)
- Accelerator Position Sensor (APS)
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting
Guide
Customer Problem Analysis
Sheet
Basic Inspection Procedure
Measuring Condition ...
Description and operation
Description
If the Gasoline Engine Control system components (sensors, ECM, injector, etc.)
fail, interruption to the fuel supply or failure to supply the proper amount
of fuel f ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Fuel Line: Repair procedures
Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel
Line")
2.
Turn the ignition switch OFF, and then remove battery (-) terminal.
...
Hyundai Creta GS 2014-2019 Service Manual: Special service tools
Special Service Tools
Tool Name / Number
Illustration
Description
Crankshaft front oil seal installer
09455-21200
Installation of the front oil seal
Valve stem oil seal installer
...
В© 2017-2026 www.hcrmangs.com
