Hyundai Creta: Specifications & Consumer information / Engine number
The engine number is stamped on the engine block as shown in the drawing.
Tire specification and pressure label
The tires supplied on your new vehicle
are chosen to provide the best
performance for normal driving.
The tire label located on the driver's
side (or front passenger’s side) center
pi ...
Air conditioner compressor label
A compressor label informs you the
type of compressor your vehicle is
equipped with such as model, supplier
part number, production number,
refrigerant (1) and refrigerant oil (2).
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Steering Angle Sensor: Description and operation
Description
Steering angle sensor
The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering)
and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses t ...
Hyundai Creta GS 2014-2019 Service Manual: Mic: Repair procedures
Inspection
1.
Disconnector the negative (-) battery terminal.
2.
Remove the mounting screws (2EA).
And then remove the overhead console (A).
3.
Remove the overhead console after disconnect the c ...
