Hyundai Creta: Lighting System / Fog Lamps: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body Electrical System / Lighting System / Fog Lamps: Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front bumper. (Refer to Body - "Front Bumper Cover")

3.	Remove the front fog lamp assembly (A) after loosening the mounting screws (4EA).

4.	Remove the front fog lamp bulb (A) by turning in the counter clock-wise direction after disconnecting the connector.

Installation

1.	Install the front fog lamp bulb.

2.	Connect the front fog lamp connector.

3.	Install the front bumper.

Rheostat: Repair procedures

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side cover. 3. Remove the ...

License Lamps: Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to Body - "Tail Gate Trim") ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Manifold Absolute Pressure Sensor (MAPS)
Description and operation Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using ...

Hyundai Creta GS 2014-2019 Service Manual: Components and components location
Components 1. Front pillar trim 2. Cowl side trim 3. Front door scuff trim 4. Center pillar lower trim 5. Center pillar upper trim 6. Rear door scuff trim 7. Rear pillar trim 8. Front door step trim 9. Rear door step trim ...