Hyundai Creta: Front Door / Front Door Inside Handle: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Inside Handle: Repair procedures

Replacement

1.	Remove the front door trim. (Refer to Front Door - "Front Door Trim")

2.	After loosening the mounting screws, then remove the front door inside handle (A).

To install, reverse the removal procedure.

•	Make sure the door locks / unlocks and opens / closes properly.

•	Replace any damaged clips.

Front Door Trim

Components and components location Component Location 1. Front door trim Repair procedures Replacement &nbs ...

Front Door Window Glass

Components and components location Component Location 1. Front door window glass Repair procedures Replacement 1. Re ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2. Remove the front door module. (Refer to Body - "Front Door Module") ...

Hyundai Creta GS 2014-2019 Service Manual: Knock Sensor (KS)
Description and operation Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylind ...