Hyundai Creta: Front Door / Front Door Side Weatherstrip: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Side Weatherstrip: Repair procedures

Replacement

Loosen the front door checker (B) mounting bolt.

Tightening torque :

21.6 ~ 32.3 N.m (2.2 ~ 3.2 kgf.m,15.9 ~ 23.9 lb-ft)

2.	Detach the clips, then remove the front door side weatherstrip (A).

To install, reverse the removal procedure.

•	Replace any damaged clips.

Front Door Belt Inside Weatherstrip: Repair procedures

Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside ...

Rear Door

...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Crankshaft
Components and components location Components 1. Crankshaft sprocket 2. Crankshaft thrust bearing 3. Crankshaft upper main bearing 4. Crankshaft 5. CKPS wheel 6. Crankshaft lower main bearing 7. Crankshaft main bearing cap Repair pr ...

Hyundai Creta GS 2014-2019 Service Manual: Wheel: Repair procedures
Inspection Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque (Front) : 88.25 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) Tightening torque (Rear) : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...