Hyundai Creta: Body Side Molding / Front Mud Guard: Repair procedures
| • |
Put on gloves to protect your hands.
|
|
| • |
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape
around the related parts, to prevent damage.
|
| • |
Take care not to scratch the body surface.
|
|
| 1. |
After loosening the mounting clip and screws, then remove the front
mud guard (A).
|
| 2. |
To install, reverse the removal procedure.
| •
|
Replace any damaged clips.
|
|
|
Replacement
•
Put on gloves to protect your hands.
...
Replacement
•
Put on gloves to protect your hands.
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Shift Cable
Components and components location
Components
1. Shift lever knob & boots
2. Shift lever assembly
3. Shift cable
4. Manual control lever
5. shift cable retainer
Repair procedures
Removal
1.
Remove the air ...
Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test
procedure as follows. Compare the system condition with normal condition in
the table below and if abnormal symptom is detected, perform necessary remedy
and inspection.
...
Rear Wheel Guard: Repair procedures
Rear Mud Guard: Repair procedures