Hyundai Creta: Engine Control / Fuel System / Fuel Delivery System
- Components and components location
- Repair procedures
- Fuel Tank: Repair procedures
- Fuel Pump: Repair procedures
- Fuel Filter: Repair procedures
- Fuel Pump Motor: Repair procedures
- Fuel Sender: Repair procedures
- Fuel Pressure Regulator: Repair procedures
- Fuel Line: Repair procedures
- Filler-Neck Assembly: Repair procedures
- Accelerator Pedal: Repair procedures
- Delivery Pipe: Repair procedures
Variable Intake Solenoid (VIS) Valve
Description and operation
Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold.
The VIS valve controls the vacuum modulator which activates ...
Components and components location
Components Location
1. Fuel Tank
2. Fuel Pump
3. Fuel Filter
4. Fuel Pressure Regulator
5. Canister
6. Fuel Tank Air Filter
7. Fuel Tank Band
8. V ...
Other information:
Hyundai Creta GS 2014-2019 Owners Manual: Opening the hood
1. Make sure the shift lever is in P
(Park, for automatic transaxle) or
first gear or R (Reverse, for manual
transaxle) and set the parking brake.
2. Pull the release lever to unlatch
the hood. The hood should pop
open slightly.
3. Go to the front of the vehicle, raise
the hood sli ...
Hyundai Creta GS 2014-2019 Owners Manual: Normal maintenance schedule (Except Mexico) - Diesel engine
I : Inspect and if necessary, adjust, correct, clean or replace.
R : Replace or change.
*1 : Inspect drive belt tensioner, idler and alternator pulley and if necessary
correct or replace.
*2 : Check the engine oil level and leak every 500 km (350 miles) or before
starting a long trip.
...
