Hyundai Creta: Convenient features of your vehicle / Fuel filler door

Closing the hood

1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from ...

Opening the fuel filler door

The fuel filler door must be opened from inside the vehicle by pulling up the fuel filler door opener. 1. Stop the engine. 2. Pull the fuel filler door opener up. 3. Pull the fuel filler do ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Wheel: Repair procedures
Inspection Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque (Front) : 88.25 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) Tightening torque (Rear) : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Hyundai Creta GS 2014-2019 Service Manual: Steering Angle Sensor: Description and operation
Description Steering angle sensor The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction and speed of the steering wheel. The HECU uses t ...