Removal |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery system - "Fuel Pump")
|
2. |
Disconnect the electric pump wiring connector (A) and the fuel sender
connector (B).
|
3. |
Remove the fixing clip (A), and then separate the head assembly (B).
|
4. |
Remove the reservoir-cup (B) after releasing the fixing hooks (A).
|
5. |
Disconnect the electric motor pump connector (A) and the ground cable
(B).
|
6. |
Remove the cap (A), and then fuel pressure regulator (B).
|
7. |
Remove the pre-filter (A) after releasing the hook.
|
8. |
Separate the electric pump motor (A).
|
9. |
Remove the fixing clip (A), and then assist pump assembly (B).
|
10. |
Replace new fuel filter.
|
Installation |
1. |
Install in the reverse order of removal.
|
Hyundai Creta GS 2014-2024 Service Manual: Evaporator Temperature Sensor
Description and operation
Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by excessive cooling. The evaporator temperature sensor has the Negative Temper ...
Hyundai Creta GS 2014-2024 Service Manual: Rear Combination Lamp: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loose the screws (2EA) holding the rear combination lamp then disconnect
the connector (A) then remove the outside rear combination lamp (B).
...