Hyundai Creta: Fuel Delivery System / Fuel Pressure Regulator: Repair procedures

Removal

1.	Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump")

2.	Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

3.	Remove the fixing clip (A), and then separate the head assembly (B).

4.	Remove the reservoir-cup (B) after releasing the fixing hooks (A).

5.	Remove the cap (A), and then fuel pressure regulator (B).

Installation

1.	Install in the reverse order of removal.

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector ( ...

Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") ...

Hyundai Creta GS 2014-2019 Service Manual: Front Seat Back Cover
Components and components location Component Location 1. Front seat back cover Repair procedures Replacement • Put on gloves to prote ...

Hyundai Creta GS 2014-2019 Service Manual: Special service tools
Special Service Tools Tool (Number and Name) IIIustration Use 09568-1S100 Ball joint remover Ball joint remover 09546-26000 Strut spring compressor Com ...