| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
|
| 2. |
Disconnect the electric pump wiring connector (A) and the fuel sender
connector (B).
|
| 3. |
Remove the fixing clip (A), and then separate the head assembly (B).
|
| 4. |
Remove the reservoir-cup (B) after releasing the fixing hooks (A).
|
| 5. |
Disconnect the electric motor pump connector (A) and the ground cable
(B).
|
| 6. |
Remove the cap (A), and then fuel pressure regulator (B).
|
| 7. |
Remove the pre-filter (A) after releasing the hook.
|
| 8. |
Separate the electric pump motor (A).
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Fuel Filter: Repair procedures
Fuel Sender: Repair proceduresHyundai Creta GS 2014-2019 Service Manual: Evaporator Temperature Sensor
Description and operation
Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by excessive cooling. The evaporator temperature sensor has the Negative Temper ...
Hyundai Creta GS 2014-2019 Service Manual: Specifications
Specifications
Manual transaxle type
M6CF1
Engine type
Gasoline 1.6 MPI
Gear ratio
1st
3.769
2nd
2.045
3rd
1.286
4th
...