Hyundai Creta: Evaporative Emission Control System / Fuel Tank Air Filter: Repair procedures

Removal
1.
Remove the fuel tank.
(Refer to Fuel Delivery System - "Fuel Tank")
2.
Disconnect the vapor hoses (A).
3.
Remove the fuel tank air filter mounting bolts (B).

4.
Remove the fuel tank air filter.
Installation
1.
Install in the reverse order of removal.
fuel tanke air filter mounting bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Fuel Filler Cap: Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel f ...

Exhaust Emission Control System
...

Other information:

Hyundai Creta GS 2014-2024 Service Manual: Components and components location
Components 1. Parking brake cover 2. Console upper cover 3. Floor console front bezel 4. Ash tray 5. Floor console assembly 6. Console rear mounting bracket ...

Hyundai Creta GS 2014-2024 Service Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The s ...

© 2017-2024 www.hcrmangs.com