Hyundai Creta: Fuel Delivery System / Fuel Tank: Repair procedures

Hyundai Creta GS 2014-2022 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Tank: Repair procedures

Removal

1.	Release the residual pressure in fuel line. (Refer to Delivery System - "Release Residual Pressure in Fuel Line")

2.	Remove the rear seat cushion assembly. (Refer to Body - "Rear Seat Assembly")

3.	Remove the fuel pump service cover (A).

4.	Disconnect the fuel pump connector (A).

5.	Disconnect the vapor tube quick connector (C).

6.	Disconnect the fuel feed tube quick connector (B).

7.	Lift the vehicle and support the fuel tank with a jack.

8.	Remove the center muffler. (Refer to Engine Mechanical System - "Muffler")

9.	Disconnect the fuel filler hose (A) and the vapor hose (B).

10.	Disconnect the leveling quick connector (C).

11.	Remove the under cover (A).

12.	Remove the parking brake cable bracket mounting bolts (A) to obtain space for removing the fuel tank.

13.

Remove the fuel tank from the vehicle after removing the fuel tank band (A).

•	When removing the fuel tank, the fuel tank must be tilted because of interfering with coupling.

Installation

Install in the reverse order of removal.

Fuel tank band mounting nut :

39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

Repair procedures

Fuel Pressure Test 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") ...

Fuel Pump: Repair procedures

Inspection [Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuel p ...

Other information:

Hyundai Creta GS 2014-2022 Service Manual: Height Adjust
Components and components location Component Location 1. Height adjust Repair procedures Replacement 1. Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Pretensioner& ...

Hyundai Creta GS 2014-2022 Service Manual: Oil Pressure Switch: Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. (Refer to Engine And Transaxle Assmbly - "Engine Room Under Cover" ) 3. Drain the e ...