Hyundai Creta: Lighting System / Hazard Lamp Switch: Repair procedures

Inspection

1.	The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of hazard lamp switch with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis.

2.	To diagnose the SJB function, select the vehicle model, BCM and SJB.

3.	To consult the present input/out value of SJB, "Current Data". It provides information of SJB input/output conditions.

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the center facia panel. (Refer to Body - "Crash Pad")

3.	Remove the audio unit. (Refer to Audio - "Audio Unit")

4.	Disconnect the hazard lamp switch connector.

5.	Remove the harzard lamp switch mounting screw (3EA).

Installation

1.	Install the hazard lamp switch.

2.	Connect the hazard lamp connector.

3.	Connect the negative (-) battery terminal.

Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror holder (A) from the outside ...

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side cover. 3. Remove the ...

Hyundai Creta GS 2014-2022 Service Manual: Components and components location
Components [LHD] 1. ABS control module (HECU) 2. Front wheel speed sensor 3. Rear wheel speed sensor 4. Steering angle sensor [RHD] 1. ABS control module (HECU) 2. Front wheel speed sensor 3. Re ...

Hyundai Creta GS 2014-2022 Service Manual: Rear Door Belt Inside Weatherstrip: Repair procedures
Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. To install, reverse the removal procedure. ...