Hyundai Creta: Heating, Ventilation and Air Conditioning
Hyundai Creta GS 2014-2019 Service Manual / Heating, Ventilation and Air Conditioning
- General Information
- Air Conditioning System
- General safety information and caution
- Description and operation
- Repair procedures
- Components and components location
- Compressor oil: Repair procedures
- Refrigerant Line
- Compressor
- Condenser
- Receiver-Drier: Repair procedures
- A/C Pressure Transducer
- Evaporator Temperature Sensor
- In-car Sensor
- Photo Sensor
- Ambient Temperature Sensor
- Auto Defogging Sensor
- Cluster Ionizer
- Heater
- Heater Unit
- Heater Core: Repair procedures
- Evaporator Core: Repair procedures
- Temperature Control Actuator
- Mode Control Actuator
- Auto Defogging Actuator
- Blower
- Blower Unit
- Blower Motor: Repair procedures
- Blower Resistor (Manual): Repair procedures
- Power Mosfet (DATC)
- Climate Control Air Filter
- Intake Actuator
- Controller
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver crash pad lower panel.
(Refer to Body - "Crash P ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Intake Actuator
Components and components location
Components Location
1. Intake actuator
Description and operation
Description
The intake actuator is located at the blower unit. It regulates the intake door
by a signal from the control unit. Pre ...
Hyundai Creta GS 2014-2019 Service Manual: Special service tools
Special Service Tools
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alterncrtor pulley.
...
В© 2017-2026 www.hcrmangs.com
