Hyundai Creta: Hood / Hood Latch

Components and components location

Component Location

1. Hood latch assembly


Repair procedures

Replacement
1.
After loosening the mounting clips, then remove the air duct (A).

2.
After loosening the mounting bolts, then remove the cover (A).

3.
Disconnect the hood latch release handle cable (A) and remove the hood latch assembly.

4.
After loosening the mounting bolts, remove the hood latch assembly (A).

5.
To install, reverse the removal procedure.
  
•
Make sure the hood locks/unlocks and opens/closes properly.
•
Adjust the latch alignment.
Hood Latch Release Handle
Components and components location Component Location 1. Hood latch release handle Repair procedures Replacement 1. U ...

Tail Gate
...

Other information:

Hyundai Creta GS 2014-2019 Owners Manual: Windshield washers
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield is dirty. The spray and wiper operation will continue until you release the lever. If the washer does not work, check ...

Hyundai Creta GS 2014-2019 Service Manual: Tail Gate Latch
Components and components location Component Location 1. Tail gate latch assembly Repair procedures Replacement    • Put on gloves to protect yo ...

© 2017-2026 www.hcrmangs.com