Hyundai Creta GS 2014-2019 Service Manual
Hyundai Creta GS 2014-2019 Service Manual
- General Information
- General Tightening Torque Table
- Important Safety Notice
- Identification Numbers
- Warning And Caution Labels
- Lift And Support Points
- Towing
- Basic Service Symbols
- General Service Information
- Engine Mechanical System
- General Information
- Engine And Transaxle Assembly
- Timing System
- Cylinder Head Assembly
- Cylinder Block Assembly
- Cooling System
- Lubrication System
- Intake And Exhaust System
- Engine Electrical System
- Emission Control System
- General Information
- Crankcase Emission Control System
- Evaporative Emission Control System
- Exhaust Emission Control System
- Engine Control / Fuel System
- Clutch System
- Manual Transaxle System
- Automatic Transaxle System
- General Information
- Clutch & Brake
- Hydraulic System
- Valve Body System
- Automatic Transaxle System
- Automatic Transaxle Cooling System
- Automatic Transaxle Control System
- Driveshaft and axle
- Suspension System
- Steering System
Air conditioner compressor label
A compressor label informs you the
type of compressor your vehicle is
equipped with such as model, supplier
part number, production number,
refrigerant (1) and refrigerant oil (2).
...
Other information:
Hyundai Creta GS 2014-2019 Owners Manual: Checking the brake/clutch fluid
level
Check the fluid level in the reservoir
periodically. The fluid level should be
between MAX (Maximum) and MIN
(Minimum) marks on the side of the
reservoir.
Before removing the reservoir cap
and adding brake/clutch fluid, clean
the area around the reservoir cap
thoroughly to prevent b ...
Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test
procedure as follows. Compare the system condition with normal condition in
the table below and if abnormal symptom is detected, perform necessary remedy
and inspection.
...
В© 2017-2026 www.hcrmangs.com
