Hyundai Creta: Driving your vehicle / Ignition switch
WARNING
To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions:
- NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or related parts. Unexpected and sudden vehicle movement can occur.
- NEVER reach through the steering wheel for the ignition switch, or any other control, while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident.
Before starting
Make sure the hood, the tailgate,
and the doors are securely closed
and locked.
Adjust the position of the seat and
steering wheel.
Adjust the inside and outside
rearview mirrors.
...
Key ignition switch
WARNING
NEVER turn the ignition switch
to the LOCK or ACC position
while the vehicle is in motion
except in an emergency. This
will result in the engine turning
off and loss of po ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Filler-Neck Assembly: Repair procedures
Removal
1.
Open the fuel filler door and unfasten the filler-neck assembly mounting
screw (A).
2.
Lift the vehicle.
3.
Remove the rear-LH wheel, tire, end the inner wheel house.
4. ...
Hyundai Creta GS 2014-2019 Service Manual: Wheel: Repair procedures
Inspection
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque (Front) :
88.25 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Tightening torque (Rear) :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...
