Hyundai Creta: Lighting System / License Lamps: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body Electrical System / Lighting System / License Lamps: Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the tailgate trim. (Refer to Body - "Tail Gate Trim")

3.	Remove the license lamp assembly (A) after disengaing the retaining clip and disconnect the connector (B).

Installation

1.	Install the license lamp assembly.

2.	Install the tailgate trim.

3.	Connect the negative (-) battery terminal.

Fog Lamps: Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover" ...

High Mounted Stop Lamp: Repair procedures

Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. (Refer to ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: General safety information and caution
Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally deploy and cause damage or injuries. • ...

Hyundai Creta GS 2014-2019 Owners Manual: Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp housing. 2. Remove the bulb by pulling it straight out. WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electri ...