Hyundai Creta: Manual Transaxle System / Manual Transaxle Fluid
General information
1. |
Check & Change intervals
Check
& Replenishment
|
Change
|
Capacity
|
Oil specification
|
Normal Use
|
Severe Use
|
60000 km / 4 years
(40000 miles / 4years)
|
No service required
|
120000 km
(80000 miles)
|
1.6 ~ 1.7
(0.42 ~ 0.44 U.S gal., 1.69 ~ 1.79 U.S.qt., 1.41 ~ 1.49 lmp qt.)
|
API Service GL-4, SAE 70W
• Recommended oil
–
|
SHELL : SPIRAX S6 GHME 70W
|
–
|
GS CALTEX : GS MTF HD 70W
|
|
Severe usage is defined as
•
|
Driving in dusty, rough roads
|
•
|
Driving in areas using salt or other corrosive materials
or in very cold weather
|
•
|
Driving in mountainous areas
|
•
|
Driving for patrol car, taxi, commercial car or vehicle
towing
|
|
|
Repair procedures
1. |
Stop the engine and uplift the vehicle with lift.
|
2. |
Loosen the oil filler plug (A).
![](images/manual_transaxle_fluid-409/236/smdmt1001d.gif)
|
3. |
Check the oil level.
Oil level must be up to fill the hole, if not, add oil until
it runs over.
|
![](images/manual_transaxle_fluid-409/236/sbkmt9018d.gif)
|
4. |
Install the filler plug.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
|
|
1. |
Uplift the vehicle with lift.
|
2. |
Drain the manual transaxle oil after loosening the drain plug (A).
![](images/manual_transaxle_fluid-409/236/smdmt1002d.gif)
|
3. |
Install the drain plug with new gasket.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)
|
|
4. |
Loosen the oil filler plug (A).
![](images/manual_transaxle_fluid-409/236/smdmt1001d.gif)
|
5. |
Add new oil through the filler plug hole and, fill it just below the
plug opening.
Standard oil: API Service GL-4, SAE 70W
Recommnend oil (- SHELL : SPIRAX S6 GHME 70W, SK : HK MTF 70W,
GS CALTEX : GS MTF HD 70W)
Oil capacity: 1.6 ~ 1.7 (0.42 ~ 0.44 U.S gal., 1.69 ~ 1.79 U.S.qt.,
1.41 ~ 1.49 lmp qt.)
|
|
6. |
Install the oil filler plug.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
|
|
Components and components location
Components
1. Control shaft complete
2. Back-up lamp switch
3. Control cable bracket
4. Plug
Repair procedures ...
Other information:
Hyundai Creta GS 2014-2024 Service Manual: Clutch Tube
Components and components location
Components
[M6CF1]
1. Clutch
pedal assembly
2. Clutch pedal arm
3. Ignition lock & clutch switch
4. Washer
5. Snap
pin
6. Master cylinder
7. Reservoir hose
8. Clutch tube
...
Hyundai Creta GS 2014-2024 Owners Manual: Blade inspection
Information
Commercial hot waxes applied by
automatic car washes have been
known to make the windshield difficult
to clean.
Contamination of either the windshield
or the wiper blades with foreign
matter can reduce the effectiveness
of the windshield wipers.
Common sources of contam ...