Hyundai Creta: Hood / Opening the hood
1. Make sure the shift lever is in P (Park, for automatic transaxle) or first gear or R (Reverse, for manual transaxle) and set the parking brake.
2. Pull the release lever to unlatch the hood. The hood should pop open slightly.
3. Go to the front of the vehicle, raise the hood slightly, push the secondary latch up (1) inside of the hood center and lift the hood (2).
4. Pull out the support rod.
5. Hold the hood opened with the support rod.
WARNING
Support rod
- Grasp the support rod in the area wrapped in rubber. The rubber will help prevent you from being burned by hot metal when the engine is hot.
- The support rod must be inserted completely into the hole provided whenever you inspect the engine compartment. This will prevent the hood from falling and possibly injuring you.
Hood
...
Closing the hood
1. Before closing the hood, check the
following:
All filler caps in engine compartment
must be correctly installed.
Gloves, rags or any other combustible
material must be removed
from ...
Other information:
Hyundai Creta GS 2014-2023 Service Manual: Clutch Cover And Disc
Components and components location
Components
1. Clutch release fork
2. Clutch cover assembly
3. Clutch disk assembly
4. Clutch release bearing
Repair procedures
Removal
1.
Remove the transaxle assembly.
...
Hyundai Creta GS 2014-2023 Owners Manual: Do not install a child restraint on
the front passenger's seat.
â– Type A
â– Type B
Never place a rear-facing child
restraint in the front passenger’s
seat. If the air bag deploys, it would
impact the rear-facing child restraint,
causing serious or fatal injury.
In addition, do not place front-facing
child restraints in the front passenger†...
