Hyundai Creta: Door locks / Operating door locks from outside the vehicle

Mechanical key

Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock.

If you lock/unlock the driver's door with a key, all vehicle doors will lock/unlock automatically. (if equipped with the central door lock system)

Once the doors are unlocked, they may be opened by pulling the door handle.

When closing the door, push the door by hand. Make sure that doors are closed securely.

Remote key

To lock the doors, press the Door Lock button (1) on the remote key.

To unlock the doors, press the Door Unlock button (2) on the remote key.

Once the doors are unlocked, they may be opened by pulling the door handle.

When closing the door, push the door by hand. Make sure that doors are closed securely.

Smart key

1. Door lock
2. Door unlock
3. Tailgate open

To lock the doors, press the button on the outside door handle while carrying the smart key with you or press the door lock button on the smart key.

To unlock the doors, press the button on the outside door handle while carrying the smart key with you or press the door unlock button on the smart key.

Once the doors are unlocked, they may be opened by pulling the door handle.

When closing the door, push the door by hand. Make sure that doors are closed securely.

Door locks
...

Operating door locks from inside the vehicle
With the door lock button To unlock a door, push the door lock button (1) to the “Unlock” position. To lock a door, push the door lock button (1) to the “Lock” position. To ope ...

Other information:

Hyundai Creta GS 2014-2023 Owners Manual: Electric power steering (EPS)
The system assists you with steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it will require increased steering effort. Also, the steering effort becomes heavier as the vehicle’s speed increases and ...

Hyundai Creta GS 2014-2023 Service Manual: Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect injector connector. 3. Measure resistance between injector terminals 1 and 2. 4. Check that the resistance is within the specif ...

© 2017-2023 www.hcrmangs.com