Hyundai Creta: Body Side Molding / Quarter Garnish: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Body Side Molding / Quarter Garnish: Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Using a screwdriver or remover, remove the quarter garnish (A).

To install, reverse the removal procedure.

•	Replace any damaged clips.

[Quarter fixed garnish]

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Using a screwdriver, remove the quarter fixed garnish (A).

To install, reverse the removal procedure.

•	Replace any damaged clips.

Fender Garnish: Repair procedures

Replacement • Put on gloves to protect your hands. ...

Door Garnish: Repair procedures

Replacement • Put on gloves to protect your hands. ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Description and operation
Description Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is controlled by length of injection time. The ECM controls each injector by grounding th ...

Hyundai Creta GS 2014-2019 Service Manual: Hazard Lamp Switch: Repair procedures
Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of hazard lamp switch with GDS quickly. GDS can operates actuator ...