Hyundai Creta: Rear Door / Rear Door Inside Handle: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Inside Handle: Repair procedures

Replacement

1.	Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim")

2.	After loosening the mounting screws, then remove the rear door inside handle (A).

To install, reverse the removal procedure.

•	Make sure the door locks/unlocks and opens/closes properly.

•	Replace any damaged clips.

Rear Door Trim

Components and components location Component Location 1. Rear door trim Repair procedures Replacement ...

Rear Door Window Glass

Components and components location Component Location 1. Rear door window glass Repair procedures Replacement 1. Pul ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Receiver-Drier: Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) ...

Hyundai Creta GS 2014-2019 Service Manual: Seat Belt Pretensioner (BPT)
Description and operation Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupan ...