Hyundai Creta: Driver assist system / Rear view camera
The Rear View Camera will activate when the engine is running and the shift lever is in the R (Reverse) position.
Whenever the vehicle ignition is cycled off and on, the rear view camera will turn on when the shift lever is put into R (Reverse).
WARNING
- Never rely solely on the Rear View Camera when backing up.
- ALWAYS look around your vehicle to make sure there are no objects or obstacles before moving the vehicle in any direction to prevent a collision.
- Always pay close attention when the vehicle is driven close to objects, particularly pedestrians, and especially children.
NOTICE
Always keep the camera lens clean. The camera may not work normally if the lens is covered with dirt or snow.
Rear parking assist system
The Rear Parking Assist System
aids the driver during reverse movement
of the vehicle by chiming if any
object is sensed within the distance
of about 120 cm (47 in.) behind the
vehicle.
T ...
Other information:
Hyundai Creta GS 2014-2024 Service Manual: Torque Converter Control Solenoid Valve (T/CON_VFS)
Description and operation
Description
•
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body.
•
This variable force solenoid valve indirectly controls the hydraulic
pressure inside the torque ...
Hyundai Creta GS 2014-2024 Service Manual: Front Impact Sensor (FIS)
Description and operation
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the Front Impact Sensor (FIS) is to provide
a ...
