Hyundai Creta: Rear Wiper/Washer / Rear Washer Motor: Repair procedures

Inspection
Front and Rear Washer Motor
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
  
•
Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter.
2.
Check that the motor operates normally and the washer motor runs and water sprays from the front nozzles.
3.
If they are abnormal, replace the washer motor.
No
Description
1
Windshield washer (+)
2
Ground
3
Rear washer (+)

Rear Washer Switch: Repair procedures
Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position according to the table. [Left ...

Lighting System
...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Tail Gate Weatherstrip: Repair procedures
Replacement 1. Remove the tail gate weatherstrip (A).    • Do not apply sealant to the body. ...

Hyundai Creta GS 2014-2019 Service Manual: Temperature Control Actuator
Components and components location Components Location 1. Temperature control actuator Description and operation Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure ...

© 2017-2026 www.hcrmangs.com