Hyundai Creta: Recommended lubricants and capacities / Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change.
Proceed to select the recommended oil viscosity from the chart.
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in
imp ...
Vehicle identification number (VIN)
The vehicle identification number
(VIN) is the number used in registering
your car and in all legal matters
pertaining to its ownership, etc.
The number is punched on the floor
under the fr ...
Other information:
Hyundai Creta GS 2014-2019 Owners Manual: Operating door locks from inside
the vehicle
With the door lock button
To unlock a door, push the door
lock button (1) to the “Unlock” position.
To lock a door, push the door lock
button (1) to the “Lock” position.
To open a door, pull the door handle
(2) outward.
If the inner door handle of the driver’s
(or f ...
Hyundai Creta GS 2014-2019 Service Manual: Special service tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09200-3N000
Engine support fixture (Beam)
Removal and installation of the transmission.
Use this beam (SST No. : 09200-3N000) with the ...
