Hyundai Creta: Clutch System / Regulator (Diesel 1.4, 1.6)

Components and components location

Components

1. Clutch pedal assembly
2. Clutch pedal arm
3. Ignition lock & clutch switch
4. Washer
5. Snap pin
6. Master cylinder
7. Reservoir hose
8. Clutch tube
9. Regulator

Repair procedures

Removal
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - " Air Cleaner)
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Remove the ECM.
(Refer to Engine Control System - "ECM")
4.
Remove the fuel filter.
(Refer to Fuel Delivery System - "Fuel Filter")
5.
Disconnect the clutch tube (C) after removing the fixing pin (B).
6.
Remove the clutch regulator (A).
  
Do not spill brake fluid on the vehicle it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.

Installation
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure in clutch release cylinder after pouring the brake fluid.
(Refer to Clutch System - "Clutch Release Cylinder")
Clutch Tube
Components and components location Components [M6CF1] 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch 4. Washe ...

Clutch Master Cylinder
Components and components location Components 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch 4. Washer 5. Snap pin 6 ...

Other information:

Hyundai Creta GS 2014-2023 Service Manual: Special service tools
Special Service Tools Tool (Number and Name) Illustration Use 09200-3N000 Engine support fixture (Beam) Removal and installation of the transmission. Use this beam (SST No. : 09200-3N000) with the ...

Hyundai Creta GS 2014-2023 Service Manual: Components and components location
Components 1. Parking brake cover 2. Console upper cover 3. Floor console front bezel 4. Ash tray 5. Floor console assembly 6. Console rear mounting bracket ...

© 2017-2023 www.hcrmangs.com