Hyundai Creta: Towing / Removable towing hook
1. Open the trunk, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the front bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully secured.
4. Remove the towing hook and install the cover after use.
Towing service
If emergency towing is necessary,
we recommend having it done by an
authorized HYUNDAI dealer or a
commercial tow-truck service.
Proper lifting and towing procedures
are necessary to preve ...
Emergency towing
If towing is necessary, we recommend
you have it done by an authorized
HYUNDAI dealer or a commercial
tow truck service.
If towing service is not available in an
emergency, your vehicle may ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Temperature Control Actuator
Components and components location
Components Location
1. Temperature control actuator
Description and operation
Description
The temperature control actuator is located at the heater unit. It regulates
the temperature by the procedure ...
Hyundai Creta GS 2014-2019 Owners Manual: Recommended cold tire inflation
pressures
All tire pressures (including the
spare) should be checked when the
tires are cold. “Cold Tires” means the
vehicle has not been driven for at
least three hours or driven less than
1.6 km (one mile).
Recommended pressures must be
maintained for the best ride, top vehicle
handling, ...
