| Adjustment |
| 1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B) by
moving it up or down, or right or left.
|
| 2. |
Adjust the hood height by turning the hood overslam bumpers (C).
|
| 3. |
After loosening the hood latch (D) mounting bolts, adjust the latch
by moving it up or down, or right or left.
|
Hood
Hood AssemblyHyundai Creta GS 2014-2019 Service Manual: Rear Coil Spring
Components and components location
Components
1. Spring lower pad
2. Spring
3. Spring upper pad
Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely s ...
Hyundai Creta GS 2014-2019 Service Manual: Fuel Pressure Regulator: Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the electric pump wiring connector (A) and the fuel sender
connector (B).
3.
Remove ...