Hyundai Creta: Tail Gate / Repair procedures

Hyundai Creta GS 2014-2025 Service Manual / Body (Interior and Exterior) / Tail Gate / Repair procedures

Adjustment

1.	After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up or down, or right or left.

2.	Adjust the tail gate height by turning the tail gate overslam bumpers (B).

3.	Remove the rear transverse trim. (Refer to Interior Trim - "Rear Transverse Trim")

4.	After loosening the tail gate striker (C) mounting bolts, adjust the tail gate striker by moving it up or down, or right or left.

Tail Gate Assembly

Components and components location Component Location 1. Tail gate assembly Repair procedures Replacement &n ...

Other information:

Hyundai Creta GS 2014-2025 Service Manual: Accelerator Position Sensor (APS)
Description and operation Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensor ...

Hyundai Creta GS 2014-2025 Service Manual: Troubleshooting
Troubleshooting Trouble Symptom Probable Cause Remedy Vehicle pulls to one side Scoring of driveshaft ball joint Replace Wear, rattle or scoring of wheel bearing Replace ...