Hyundai Creta: Fuel Filler Door / Repair procedures

Replacement
  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
1.
Open the fuel filler door cap (A).

2.
After loosening the mounting bolts, then remove the fuel filler door (A).
  
•
Pull out from inside of the packing part when removing the fuel filler door housing.

3.
To install, reverse the removal procedure.
  
•
Make sure the fuel filler door locks / unlocks and opens / closes properly.
•
Replace any damaged clips.
Components and components location
Component Location 1. Fuel filler door ...

Front Door
...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Regulator (Diesel 1.4, 1.6)
Components and components location Components 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch 4. Washer 5. Snap pin 6. Master cylinder 7. Reservoir hose 8. Clutch tube 9. Regulator Repair ...

Hyundai Creta GS 2014-2019 Owners Manual: Recommended SAE viscosity number
CAUTION Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent d ...

© 2017-2026 www.hcrmangs.com