Hyundai Creta: Cowl Top Cover / Repair procedures

Replacement

Remove the cap (A) and remove the nuts, then remove the wiper arm (B).

Tightening torque :

22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.	Disconnect the nozzle hose (B).

3.	Detach the clips, then remove the cowl top cover (A).

To install, reverse the removal procedure.

•	Replace any damaged clips.

Component Location 1. Cowl top cover ...

...

Hyundai Creta GS 2014-2024 Service Manual: Components and components location
Component Location 1. Horn switch 2. Horn relay (Engine room - PCB Fuse & Relay Block) 3. Horn (Low pitch) 4. Horn (High pitch) 5. Clock spring ...

Hyundai Creta GS 2014-2024 Service Manual: General information
Tightening Torque Table of Standard Parts BOLT (Nominal diameter) NUT (Nominal diameter) BOLT/NUT Normal screw Torque Nm (kg.m, Ib-ft) Nominal diameter. ...