Hyundai Creta: Back View Camera System / Repair procedures

Removal
1.
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
2.
Remove the tailgate back panel.
(Refer to Body - "Tailgate Back Panel")
3.
Disconnector the connector (A) from the back view camera.
4.
Remove the back view camera (B) after loosening the screws (2EA).

Installation
1.
Install the back view camera.
2.
Install the tailgate back panel and tailgate trim.
Description and operation
Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system th ...

Button Engine Start System
...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Compressor
Description and operation Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low-pressure and low-temperature refrigerant gas into high-pressure and high-te ...

Hyundai Creta GS 2014-2019 Service Manual: Description and operation
Description This specification applies to HCU(Hydraulic Control Unit) and ECU(Electronic Control Unit) of the HECU.(Hydraulic and Electronic Control Unit) This specification is for the wiring design and installation of ABS/ESP ECU. This unit has the functions as follows. ...

В© 2017-2026 www.hcrmangs.com