Hyundai Creta: Lighting System / Rheostat: Repair procedures
| Inspection |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad side cover.
|
| 3. |
Remove the crash pad lower panel (A).
(Refer to Body - "Crash Pad Lower Panel")
|
| 4. |
Remove the rheostat switch connector (A).
|
| 5. |
Remove the rheostat switch mounting screws (4EA).
|
| 6. |
Check for intensity of new rheostat switch. If the light intensity of
the lamps changes smoothly without any flickering when the rheostat
is turned, it can be assumed that the rheostat is normal.
|
Hazard Lamp Switch: Repair procedures
Inspection
1.
The SJB can be diagnosed by using the GDS. The SJB communicates with
the GDS which then displays inputs and outputs along with codes.
It will ...
Fog Lamps: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover" ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Description and operation
Description
Back view camera will activate when the backup light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehicle through the
AV monitor or the ECM (Reverse Display Room Mirror) mirro ...
Hyundai Creta GS 2014-2019 Owners Manual: Manual transaxle operation
The manual transaxle has 6 forward
gears. The transaxle is fully synchronized
in all forward gears so shifting
to either a higher or a lower gear is
easily accomplished.
WARNING
Before leaving the driver’s seat,
always make sure the shift lever is
in 1st gear when the vehicle is
...
