Inspection |
1. |
Check that the switch operates properly after disconnecting the room
lamp connector (A).
|
Removal |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Carefully remove the lamp lens (A) from the room lamp with a flat-tip
screwdriver.
|
3. |
Replace the bulbs (A) and remove the screws if it is necessary.
|
4. |
Remove the room lamp assembly (A) after disconnecting the connector
(B).
|
Installation |
1. |
Reconnect the connector.
|
2. |
Install the room lamp assembly.
|
3. |
Install the lens.
|
Hyundai Creta GS 2014-2023 Service Manual: Components and components location
Component Location
1. BCM (Body Control Module)
2. Ultrasonic sensor
※ Rear parking assist control
unit function is built in BCM (body control unit).
...
Hyundai Creta GS 2014-2023 Service Manual: Valve clearance adjustment
Inspection
Valve Clearance Inspection And Adjustment
•
Inspect and adjust the valve clearance when the engine is cold
(Engine coolant temperature : 20°C) and cylinder head i ...