Hyundai Creta: General Information / Special service tools
| Special Service Tools |
|
Tool (Number and Name) |
IIIustration |
Use |
|
09568-1S100 Ball joint remover |
|
Ball joint remover |
|
09546-26000 Strut spring compressor |
|
Compression of coil spring |
|
09546-3X100 Shock absorber lock nut removal tool |
|
Used for remove the shock absorber lock nut. |
Specifications
Specifications
Front Suspension
Item
Specification
Suspension type
MacPherson Strut
Shock absorber
...
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Hard steering
Improper front wheel alignment
Excessive turning resist ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Manifold Absolute Pressure Sensor (MAPS)
Description and operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and
is installed on the surge tank. It senses absolute pressure of the surge tank
and transfers the analog signal proportional to the pressure to the ECM. By
using ...
Hyundai Creta GS 2014-2019 Service Manual: Blower Resistor (Manual): Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor)
Replacement
...
