Hyundai Creta: General Information / Specifications
| Specifications |
|
Item |
Specification |
|
Coil Resistance (Ω) |
14.0 ~ 18.0 [20°C(68°F)] |
| Tightening Torques |
|
Item |
kgf.m |
N.m |
lb-ft |
|
Positive Crankcase Ventilation (PCV) valve installation |
0.18 ~ 0.29 |
1.8 ~ 2.8 |
1.3 ~ 2.1 |
|
Fuel tank air filter installation bolt |
0.4 ~ 0.6 |
3.9 ~ 5.9 |
2.9 ~ 4.3 |
Description and operation
Description
Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by gas from releasing
into the a ...
Troubleshooting
Troubleshooting
Symptom
Suspect area
Engine will not start or struggle to start
Vapor hose damaged or disconnected
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Underdrive Brake Control Solenoid Valve (UD/B_VFS)
Description and operation
Description
•
Underdrive brake control solenoid valve (UD/B) is attached to the valve
body.
•
This variable force solenoid valve indirectly controls the hydraulic
pressure inside the underdrive b ...
Hyundai Creta GS 2014-2019 Service Manual: Steering Angle Sensor: Description and operation
Description
Steering angle sensor
The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering)
and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses t ...
