Hyundai Creta: Body (Interior and Exterior) / Tail Gate

Hood Latch
Components and components location Component Location 1. Hood latch assembly Repair procedures Replacement 1. After l ...

Repair procedures
Adjustment 1. After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up or down, or right or left. 2. ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of th ...

Hyundai Creta GS 2014-2019 Owners Manual: Checking the engine oil level
1.Be sure the vehicle is on level ground. 2.Start the engine and allow it to reach normal operating temperature. 3.Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan. 4.Pull the dipstick out, wipe it clean, and reinsert it fully. WAR ...

В© 2017-2026 www.hcrmangs.com